onemorecame
08-21 04:12 PM
Interview is not mandatory for I485. Only a small percentage gets the interview call.
Congratulations
Congratulations
wallpaper 2010 girlfriend long love
baburob2
11-02 02:42 PM
As per my knowledge, GC thru employment is for future job position, i.e. Once your GC is approved you should do the job in that area.
Plz. correct if I am wrong.
My company has filed one of my Labor (stuck in DBEC) from MN, while I am working in Texas from Last five years.
I concur that "GC thru employment is for future job position, i.e. Once your GC is approved you should do the job in that area.". Hence your move is fine.
Plz. correct if I am wrong.
My company has filed one of my Labor (stuck in DBEC) from MN, while I am working in Texas from Last five years.
I concur that "GC thru employment is for future job position, i.e. Once your GC is approved you should do the job in that area.". Hence your move is fine.
franklin
10-10 02:28 PM
If I remember correctly, there is information on the paperwork that you receive your card with that states something along the lines of:-
"Please check the information on the card, if any of it is correct please call XXX number / write to us at YYY"
Have you tried that?
"Please check the information on the card, if any of it is correct please call XXX number / write to us at YYY"
Have you tried that?
2011 tattoo tattoo long love poems for long love poems for your girlfriend. cute
morpheus
04-02 10:45 PM
I just did some further reading and research, and it appears that an H1 could do the following if this bill passed tomorrow.
1. Quit their job
2. Form an LLC and self-employ
3. File for 218D status. Once this is approved, you are able to work anywhere. It's not clear if there will be a filing procedure or not.
4. Wait six years.
5. File for green card. Note that 218D requires you to work for the entire six years - but it can be full-time, part-time, self-employment or full time study.
I can't believe it could be that simple. The only downside is that there might be 10 million people in the queue for 218D, so it will probably be backlogged until 2026!
1. Quit their job
2. Form an LLC and self-employ
3. File for 218D status. Once this is approved, you are able to work anywhere. It's not clear if there will be a filing procedure or not.
4. Wait six years.
5. File for green card. Note that 218D requires you to work for the entire six years - but it can be full-time, part-time, self-employment or full time study.
I can't believe it could be that simple. The only downside is that there might be 10 million people in the queue for 218D, so it will probably be backlogged until 2026!
more...
aph0025
11-12 12:24 PM
it depends on USCIS officer. i had a good lawer when I applied for h1b transfer. i got stuck for one 15 days paycheck. eventually it is cleared after submitting the paper work. having good lawer is not enough. depends on your luck or USCIS officer also
Thanks for your input. So, the pay stub that you submitted, was it from your previous employer, or the one you got your visa transferred to? Hey, if you don't mind, can I have your lawyer�s contact details?
Thanks for your input. So, the pay stub that you submitted, was it from your previous employer, or the one you got your visa transferred to? Hey, if you don't mind, can I have your lawyer�s contact details?
TheOmbudsman
08-24 01:22 PM
Stupid answer:
Less than what Indians would like.
in EB3, EB2 and EB1
Less than what Indians would like.
in EB3, EB2 and EB1
more...
nixstor
08-24 04:14 PM
Did you consider the 20k cap for Masters students? If they can plan to graduate in summer instead of spring they can safely use all OPT and get H1B with out pain. I know many guys who didnt use all of OPT (used half of it) and landed on H1B to be in status. I agree with the loan situation you mentioned though.
I think thats what SKIL is trying to do by making OPT 2 yrs. It gives the much needed leeway for students to move from F1 to H1 and finding a better employer instead of running to consultants for H1B.
B T W Are you the same guy who was looking for Pre approved labor on the other site.
I think thats what SKIL is trying to do by making OPT 2 yrs. It gives the much needed leeway for students to move from F1 to H1 and finding a better employer instead of running to consultants for H1B.
B T W Are you the same guy who was looking for Pre approved labor on the other site.
2010 long love poems for your
ashkam
08-09 09:34 AM
i filed my 140 on july 12th. Received receipt notice from TSC on jul 23rd.
My attorney filed for 485 on aug 2nd. But he filed with old fee and old 485 forms. He says i fall under july visa bulletin, so i can file with older fee.
Is he correct? Will there be no problem with my application?
Your attorney is right. Old fees apply and old forms are fine.
My attorney filed for 485 on aug 2nd. But he filed with old fee and old 485 forms. He says i fall under july visa bulletin, so i can file with older fee.
Is he correct? Will there be no problem with my application?
Your attorney is right. Old fees apply and old forms are fine.
more...
va_dude
03-09 01:21 PM
To port from EB3 to EB2, you will need an approved EB2 labor.
You can't just randomly convert your EB3 to EB2 just because you are more qualified, etc. Besides the category, Eb1,2,3 is determined by the job requirements, not your qualification. So you could be a PhD from MIT, but if the job requires only a Bachelor's for example, you can't do an Eb2.
So in your case, your new employer C would need to file for a new labor in EB2 and then do the 140 after labor approval.
I'm not a 100% sure if you can do the porting while filing the new 140 or only after its approval. For that you might need to confirm with an attorney consult.
My advice - spend the 100/200 bucks and get a 1 hour consult with a reputed attorney or the attorney that employer C works with.
You can't just randomly convert your EB3 to EB2 just because you are more qualified, etc. Besides the category, Eb1,2,3 is determined by the job requirements, not your qualification. So you could be a PhD from MIT, but if the job requires only a Bachelor's for example, you can't do an Eb2.
So in your case, your new employer C would need to file for a new labor in EB2 and then do the 140 after labor approval.
I'm not a 100% sure if you can do the porting while filing the new 140 or only after its approval. For that you might need to confirm with an attorney consult.
My advice - spend the 100/200 bucks and get a 1 hour consult with a reputed attorney or the attorney that employer C works with.
hair girlfriend long love poems for
yabadaba
06-22 09:38 AM
is a TB skin test neccessary even if you tell the doc you've had a history of positive TB tests? do i have to prove i've had a history of postive TB test for the doctor to remark that on i-693..or can he just remark that without evidence and go on my word
thanks
u need evidence. in writing.
thanks
u need evidence. in writing.
more...
badluck
06-25 02:47 PM
It looks like my lawyer has already mailed the application to USCIS. The priority dates becomes current only on July 1st.
What are my options here? Does anyone has faced such a situation?
send new again. anyways first one is going to come back.
What are my options here? Does anyone has faced such a situation?
send new again. anyways first one is going to come back.
hot wallpaper long love poems for your long love poems for your girlfriend. long
smurugan
11-02 03:37 PM
Thanks folks for all the replies. I got to know finally that the employer can setup the LC to provide for any relocation. It looks like my employer usually does that so that the employees does not loose out in a relocation scenario.
Thanks for all the inputs
Thanks for all the inputs
more...
house cute love poems for your
sury
11-07 10:26 AM
If EB2 PD is 1 APR 2004 then what does the ProcessingTimeFrame Date(August 25, 2006) mean for I-485 in Texas Service Center.
Can anyone clarify. Guys exuse my Ignorance...I just want to know the rule
Can anyone clarify. Guys exuse my Ignorance...I just want to know the rule
tattoo 2011 long love poems for your
logiclife
05-14 04:41 PM
Message from the core group :
Even though there is a huge movement forward in PDs for EB2 and EB3, the immigration voice core group is not scaling back. We are going to continue our efforts in full speed ahead . For those who are out of the retrogression in June, CONGRATS...we really are happy about the current movement.
The core group is still committed to getting retrogression issue addressed by congress. In fact, I am right now in DC and I am attending a briefing event tommorow where Senator Alexander and Senator Bingaman will be present and the event is about high-skills immigration. Aman and Pratik were here last week thursday and Friday and will be here again next week. We are continuing efforts regardless of this big jump because we know that dates can move in reverse direction as it has in the past. In Oct 2005, EB3 dates took a huge movement backwards into 1998 and such reverse movements can happen again this year in October or in last quarter of fiscal year 2007. So we are taking this with cautious optimism and continuing our work with this.
Core group's job is not over until all dates are current and significant other reforms are brought to Greencard process and other related issues.
Even though there is a huge movement forward in PDs for EB2 and EB3, the immigration voice core group is not scaling back. We are going to continue our efforts in full speed ahead . For those who are out of the retrogression in June, CONGRATS...we really are happy about the current movement.
The core group is still committed to getting retrogression issue addressed by congress. In fact, I am right now in DC and I am attending a briefing event tommorow where Senator Alexander and Senator Bingaman will be present and the event is about high-skills immigration. Aman and Pratik were here last week thursday and Friday and will be here again next week. We are continuing efforts regardless of this big jump because we know that dates can move in reverse direction as it has in the past. In Oct 2005, EB3 dates took a huge movement backwards into 1998 and such reverse movements can happen again this year in October or in last quarter of fiscal year 2007. So we are taking this with cautious optimism and continuing our work with this.
Core group's job is not over until all dates are current and significant other reforms are brought to Greencard process and other related issues.
more...
pictures hairstyles love poems for a
JazzByTheBay
09-08 11:49 AM
Given the demographics of the greater Seattle area in general, and Redmond in particular - I'm surprised "softies" haven't taken over the WA chapter completely... :)
Hope to see all of you in DC..
cheers!
jazz
My wife and me have joined the yahoogroups for WA chapter, We are going for the rally, how can we encourage more friends in WA state to go? I know there are people willing to sponsor, provide part of funds, help with accommodation and so on and if anyone in WA has any of these limitations, people are willing to coordinate. How do we get the point across to all Washingtonian GC sufferers or people who just filed for 485 and don't see the bleak tomorrow. How do we wake them up all up? We have so many employers here, is there something we can do to wake them up from the slumber and mirage of filing 485? I must admit, I was sleeping too until yesterday when we booked our tickets.
Hope to see all of you in DC..
cheers!
jazz
My wife and me have joined the yahoogroups for WA chapter, We are going for the rally, how can we encourage more friends in WA state to go? I know there are people willing to sponsor, provide part of funds, help with accommodation and so on and if anyone in WA has any of these limitations, people are willing to coordinate. How do we get the point across to all Washingtonian GC sufferers or people who just filed for 485 and don't see the bleak tomorrow. How do we wake them up all up? We have so many employers here, is there something we can do to wake them up from the slumber and mirage of filing 485? I must admit, I was sleeping too until yesterday when we booked our tickets.
dresses house nice love poems for your
sr123
02-15 10:43 AM
There are 2 kinds of posts...(1) Which add value to the forum. Threads started for 401K, selecting a lawyer etc add value since they attract new members. (2) The second kind of posts are the ones initiated by people who want to ask questions. This questions tend to be serving individuals.
I think we should not restrict the first type of posts. There could some kind of charge on the second kind. One suggestion which may work is as follows
1. Only paying members can initiate threads(or may be allow the first few for free ). Exceptions can be permitted by admins who can review if a post could be useful.
2. Anyone can post answers to existing threads.
By the way I am not sure of the technical aspect of the website operations. So please bear with me if my post reflects the same.
I think we should not restrict the first type of posts. There could some kind of charge on the second kind. One suggestion which may work is as follows
1. Only paying members can initiate threads(or may be allow the first few for free ). Exceptions can be permitted by admins who can review if a post could be useful.
2. Anyone can post answers to existing threads.
By the way I am not sure of the technical aspect of the website operations. So please bear with me if my post reflects the same.
more...
makeup hairstyles love poems to a
sac-r-ten
02-26 04:56 PM
Sorry for your situation. Its better to look for H1 transfer soon. Also expose such body shopper here, so that future H1B are aware of such dingy fly by night operators.
Nothing more anybody can do here on this forum, because everyone is sitting tight and holding on to their seats in this economy.
Good luck man.
Nothing more anybody can do here on this forum, because everyone is sitting tight and holding on to their seats in this economy.
Good luck man.
girlfriend nice love poems for your girlfriend. hairstyles nice love poems for
desigirl
12-01 09:52 AM
We need to get all these businesses to join together with Immigration voice and support us by lobbying and funding.
No Great H-1b will come here if its going to take 10-20 years to get a Green card.
I would suggest, lets have another action item to write to these companies about IV and ask for their help for Legal Immigrants that everyone needs.
This is a big thing that is missing so far.
See how the president of the Agricultural board, unions appear on TV asking for support for illegals and also get invited to Congress.
Definitely a good idea.........the first thing that needs to happen is for us immigrants to contact our own employers (and if it is a big company - they will have some section that deals with govt affairs/lobbying) ask them to support our cause through action.......
I work for a small company, but my employer is a very decent man and may provide some funds..........(Christmas season and all!).
If he chooses to donate would it be the "contribute" link?
No Great H-1b will come here if its going to take 10-20 years to get a Green card.
I would suggest, lets have another action item to write to these companies about IV and ask for their help for Legal Immigrants that everyone needs.
This is a big thing that is missing so far.
See how the president of the Agricultural board, unions appear on TV asking for support for illegals and also get invited to Congress.
Definitely a good idea.........the first thing that needs to happen is for us immigrants to contact our own employers (and if it is a big company - they will have some section that deals with govt affairs/lobbying) ask them to support our cause through action.......
I work for a small company, but my employer is a very decent man and may provide some funds..........(Christmas season and all!).
If he chooses to donate would it be the "contribute" link?
hairstyles girlfriend I Love You Quotes
dbevis
December 5th, 2003, 11:13 PM
Could you put a link up to that plug in? I really like that.
I was playing around with it again tonight - I posted a couple more examples in the gallery area, under "landscapes".
This is not a plugin, persay. It's a PaintShop Pro script - not PhotoShop. Here's what the script does:
Split to RGB, discard G & B
"Clarify" (twice) at a high value to deepen the contrast range.
Adjusts the luminance channel to further enhance contrast.
Colorizes the image with a hue value of 160 and saturation a low setting of 20 to slightly shift grays towards blues.
I then added the original full-color image in as a layer and merged the two with partial opacity in (I think) "hue" mode.
The Clarify operation gives it an "old" look by accentuating and muddling the contrast. The lumininance adjustment makes the overall appearance more 'harsh'. The shift towards blue tends to simulate a bit of fading (like an old snaphot, I guess).
The painting-like effect comes from merging in the colors from the original.
Here's the actual script file (it's in the "Python" programming language):
--------------------------------------
from JascApp import *
def ScriptProperties():
return {
'Author': '',
'Copyright': '',
'Description': '',
'Host': 'Paint Shop Pro',
'Host Version': '8.00'
}
def Do(Environment):
App.Do( Environment, 'SplitToRGB', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'HistogramAdjustment', {
'LuminanceChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 245,
'HighClipLimitPercentage': 0.01,
'LowClipLimit': 2,
'LowClipLimitPercentage': 0.01,
'MaxOutput': 255,
'MinOutput': 0
},
'RedChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'GreenChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'BlueChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'TargetChannel': 0,
'OverlayResultHistogram': App.Constants.Boolean.true,
'HistogramEditMode': App.Constants.HistogramEditMode.Luminance,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'IncreaseColorsTo16Million', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Colorize', {
'Hue': 160,
'Saturation': 20,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
I was playing around with it again tonight - I posted a couple more examples in the gallery area, under "landscapes".
This is not a plugin, persay. It's a PaintShop Pro script - not PhotoShop. Here's what the script does:
Split to RGB, discard G & B
"Clarify" (twice) at a high value to deepen the contrast range.
Adjusts the luminance channel to further enhance contrast.
Colorizes the image with a hue value of 160 and saturation a low setting of 20 to slightly shift grays towards blues.
I then added the original full-color image in as a layer and merged the two with partial opacity in (I think) "hue" mode.
The Clarify operation gives it an "old" look by accentuating and muddling the contrast. The lumininance adjustment makes the overall appearance more 'harsh'. The shift towards blue tends to simulate a bit of fading (like an old snaphot, I guess).
The painting-like effect comes from merging in the colors from the original.
Here's the actual script file (it's in the "Python" programming language):
--------------------------------------
from JascApp import *
def ScriptProperties():
return {
'Author': '',
'Copyright': '',
'Description': '',
'Host': 'Paint Shop Pro',
'Host Version': '8.00'
}
def Do(Environment):
App.Do( Environment, 'SplitToRGB', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'HistogramAdjustment', {
'LuminanceChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 245,
'HighClipLimitPercentage': 0.01,
'LowClipLimit': 2,
'LowClipLimitPercentage': 0.01,
'MaxOutput': 255,
'MinOutput': 0
},
'RedChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'GreenChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'BlueChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'TargetChannel': 0,
'OverlayResultHistogram': App.Constants.Boolean.true,
'HistogramEditMode': App.Constants.HistogramEditMode.Luminance,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'IncreaseColorsTo16Million', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Colorize', {
'Hue': 160,
'Saturation': 20,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
santb1975
02-15 09:17 AM
We gotto
eb3_2004
11-19 12:28 PM
Check now...It is updated
No comments:
Post a Comment